Bearings/Hubs/Brakes

Actuator 20K Disc Brake 2-5/16th DemcoLoad Rite's 20,000lb capacity disc brake actuator.Features:20K Disc Braking ActuatorDemco BrandBolt onZinc Plated2-5/16" ball coupler3" channel tongue

Actuator 8.5K - 2" BallSpecifications:8,500 lbs CapacityFits 2″ Hitch BallFor Use with Disc Brakes

Knott Disc Brake Caliper with Brake Pads Left SideFeatures:Autoflex Knott Brand Disc Brake Caliper AssemblyLeft Hand Assembly (Driver’s Side)Dacromet® FinishShips Complete with Brake Pads & Sliding Pins InstalledFits 10″ Autoflex...

10" Dexter Brake KitNote: No mounting bracket is required for the 5-bolt kit, but a plate will be included in the 6-bolt.Specifications:Calipers: AluminumSize: 10"

7.7K Disc Brake ActuatorSpecifications:Disc BrakingSurge ActuatorTie Down EngineeringCapacity: 7,700 lbs For use with Disc Brakes

6.6K Disc Brake Actuator - Tie Down Engineering - Fits 2" Hitch Ball6,600 lbs Capacity, Tie Down Engineering Disc Braking, Surge ActuatorSpecifications:6,600 lbs CapacityFits 2″ Hitch BallFor Use with Disc Brakes

Rotor Complete Kit Vented 9.75" Integral, No Grease 5 Stud Dacromet Finish KnottComplete 9.75″ Disc Brake Rotor Assembly Manufactured by Autoflex Knott.Replacement Disc Brake Rotor Assembly: Fits 5 on 4.5″ Bolt Pattern. Inorganic,...

Brake Pads 10 & 12" Disc Full Axle 2 Sets Inner & OuterFeatures:Optimal at Transferring Heat Generated From BrakingUse with EITHER 10″ or 12″ Disc Brake Rotor AssembliesSold as FULL SET, BOTH Inner and Outer Assemblies, for ONE (1)...

10″ Knott Disc Brake KitLoad Rite's 5-lug, 10-inch vented integral rotor disc brake kit is manufactured by AutoFlex KNOTT and fits KNOTT 3,700 lbs. capacity 5-bolt axles.Kit Includes:Vented cupped and studded, zinc rotor, and hub assemblyLoaded...

3/4" Wheel Bearing KitIt may not be an immediate thought, but a trailer's wheels need to be cared for just like the wheels of a vehicle. This wheel bearing kit includes two bearing cones, two bearing cups, a grease seal, and a cotter pin. The bearings...

HubMate Wheel Bearing ProtectorsHubMate™ bearing protectors replace the dust caps in the wheel hub. The accessible grease fitting allows you to add grease without disassembling it. Positive grease pressure keeps water and dirt out...

Trailer Hub Kit - 1-3/8" x 1-1/16" Tapered - 5 x 4-1/2" GalvanizedFeatures:1-3/8" x 1-1/16" Tapered5 x 4-1/2" GalvanizedWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of...

Grease Seals f/1" to 1-1/16" Straight SpindleProduct DescriptionNeed to reseal trailer wheels? No need to purchase an entire wheel bearing set when all you need are the seals. Smith "double-lip seals with gripper springs" are the best available and...

CE Smith Dust Caps - Hub ID 1.980" - (Pair)Product DescriptionUse this dust cap to protect your axle nut.Features:Fits hub with inner diamerter of 1.98"Sold in pairsWARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are...

Trailer Hub KitHub Kits come complete and ready to install on your axel. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. Spindle: 1-3/8" - 1-1/16"Bolt Cir: 5 x 4.5Cap:...

Hub Kits come complete and ready to install on your axel. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. Spindle: 1-1/16"Bolt Cir: 5 x 4.5Cap: 1350Flange O.D.:...

Hub Kits come complete and ready to install on your axle. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. WARNING: This product can expose you to chemicals including...