Blowers & Heaters

4" Flangemount Heavy Duty Blower - 24V - 250 CFMThe powerful flange mount blower is designed for use wherever continuous ventilation is required. A motor life of 5,000 hours is guaranteed for service in the most challenging conditions.Features:Extended...

In-Line 3" Bilge Blower - 24VFeatures:Connections: - for 75mm (3") ductingDimensions: - 130mm long, 95mm high, 125mm wideFuse Size: - 2.5(amp)Output: - 3.8 cu. m/minuteEfficient high volume airflowQuiet runningSlip-on inlet and...

MSD SpoutRotating pour-out spoutThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

3" Blower Flange Mounted - 12VFeatures:3" ducts12V100 percent factory tested

Temperature & Pressure Relief Valve - 1/2" Valve with 4" ProbeProtect your RV water heater from excessive temperatures and water pressure with corrosion-resistant metal T&P valves. All valves are factory set at 150 PSI and are crafted with no gaskets...

YELLOWTAIL™ 4" Marine Blower - 12 VDC, 215 CFMSHURFLO has developed a unique nylon fan that includes six blades to ensure high performance and efficient ventilation for bilges, engine compartments, galleys and heads. Installation of the YELLOWTAIL...

YELLOWTAIL™ 3" Marine Blower - 12 VDC, 120 CFMSHURFLO has developed a unique nylon fan that includes six blades to ensure high performance and efficient ventilation for bilges, engine compartments, galleys and heads. Installation of the YELLOWTAIL...

3" In-Line BlowerInlet/Outlet - 3"CFM - 158Johnson Pump in-line blowers provide ventilation for bilges, engine compartments, galleys, and heads.Made from high quality ABS plastic construction, corrosion resistant motors, and premium electrical...

Turbo 4000 Series II In-Line BlowerPart #: 1749-4Attwood's improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of...

Turbo 3000 Series In-Line BlowerPart #: 1733-4The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input...

DC 250 CFM Flexmount Continuous Duty 4" BlowersFeatures:Extended Life 5,000 Hour MotorTough Reinforced Thermoset Plastic HousingMounts To Any Flat SurfaceSlip-On Inlet Ducting ConnectionEfficient High Volume Air FlowLow-Current DrawCorrosion-Resistant...

DC 150 CFM Flexmount 3" BlowersFeatures:Tough Reinforced Plastic HousingUniversal flexmount bracket permits outlet to face any directionSlip-On Inlet and Outlet Ducting ConnectionEfficient High Volume Air FlowLow Current DrawCorrosion-Resistant...

DC 250 CFM Flangemount 4" BlowersFeatures:Tough Reinforced Plastic HousingMount to any Flat surfaceSlip-On Inlet Ducting ConnectionEfficient High Volume Air FlowLow Current DrawCorrosion-Resistant Materials ThroughoutN.M.M.A. Type AcceptedMeets USCG...

DC 150 CFM Flangemount 3" BlowersFeatures:Tough Reinforced Plastic HousingMount to any surfaceSlip-On Inlet and Outlet Ducting ConnectionEfficient High Volume Air FlowLow Current DrawCorrosion-Resistant Materials ThroughoutN.M.M.A. Type AcceptedDC...

Flexmount BlowerHigh volume air intake or extraction blowers for engine room, fuel compartment, galley or headsFeatures:Flexmounting for 360° adjustable outletSlip-on inlet and outlet ducting connectionLow current drawDimensionally stable quiet...

DC 105 CFM Flangemount 3" BlowersJabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from bilge areas. If desired, they also may be used for other general air circulation applications with longer duty cycles...

AC 100 CFM Flangemount 3" BlowersFeatures: Tough Reinforced Plastic HousingContinuous duty motor with thermal overloadMount to any surfaceSlip-On Inlet and Outlet Ducting ConnectionEfficient High Volume Air FlowCorrosion-Resistant Materials Throughout...

Rule In-Line Blower - 4" DuctingPart Number: 240Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat...

Rule In-Line Blower - 3" DuctingPart Number: 140Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat...

Heavy Duty Flexmount BlowerAC 250 CFM Flexmount Continuous Duty 4" BlowerFlexmount Blowers are built to the same high specification as the Heavy Duty Flangemount Blowers for use as air intake or extraction systems in engine rooms, fuel compartments,...