Hardware

Deck Organizer Size 1 - 3 SheaveDesigned for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminum construction with a grey or black anodized finish. Sheaves are from molded Acetal with...

Spinnaker Pole Slide Car (32mm)Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Generous ring opening to accept most pole ends.Plain bearing genoa cars, sliders, and spinnaker pole slides,...

Deck Plate with Fixing & Eye with Blanking Plug - M12 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each...

Tubular Cleat - 6mmThese handy cleats have many uses where light loads are expected.Specifications:Weight: 5gDimensions: 55mm x 13mm x 14mmSize: 55mmFastenings: 4mm

Deck Eye - Stainless Steel - 14mmStainless steel deck eyes with generous eye capacity.Specifications:Stainless SteelDeck EyeSingle14mm Height x 14mm Width x 5mm Fastenings

7mm Dyneema Loop with High Load Eye - 22mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including barber hauler, preventers, mast base block tidies, emergency blocks, occasional...

Deck Plate with Fixing & Eye with Blanking Plug - M8 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each...

4mm Rope Stoppers - Black - PairRope Stoppers can also be referred to as parrel beads, tie balls, halyard stoppers, or stopper balls, and are primarily used in rope management.At the end of a line, Rope Stoppers serves as an easy-to-grab end knob, can...

Stainless Steel Split Rings - 10mm - 10-PackFeatures:Easy-fit stainless steel split rings for use with our clevis pinsSupplied in packs of 10Specifications:Weight: 3gDimensions: 30mm x 30mm x 4mm

Single DO 550 Rope Clutch Cruising Racing Max 12mm LineFor cruising and racing yachts, offering a holding power of up to 550 kgs. Modern, high-performance materials. Manufactured from modern lightweight materials, the DO 550 moulded parts are made...

29mm Carbo Double Swivel Symmetrical Fishing PulleyDesigned to improve the deployment and retraction responsiveness and the precise presentation of bait teasers aboard sport fishing boats. The unit features two back-to-back 29 mm sheaves, which make it...

5/16 Stainless Steel Sail Snap +Features:Grade 316L stainless steel forged sail snapsEasy to install (single-handed operation)Efficient use: no jamming of the systemSpecifications:Materials: 316L stainless steel gradeLength (mm): 110Working load (kg):...

25mm T-Track Genoa CarBarton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine...

Low Friction Ring Strap Eye - Stainless SteelFor the concerning dinghy sailor. Barton has offered stainless steel deck eyes for a long while, but as performance on boats improves, the desire to reduce friction on deck fixings and turning points of lines...

Triple DO 550 Rope ClutchModern, high-performance materials. Manufactured from modern lightweight materials, the DO 550 molded parts are from high-grade plastics that are strong, light, and impact-resistant. Cams and bases are from marine grade...

'K" Cam MiniManufactured from Dupont Kevlar/Zytal, K Cams are available in 3 sizes to accept lines up to 14mm (9/16”) in diameter. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins...

High Load Eye 6mm BoreAvailable in six sizes. Manufactured in marine-grade aluminum with a hard anodized finish. These lightweight high-load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, and ast base tidies to...

Size 7 70mm Plain Bearing Pulley Block Single SwivelThe size 7 Barton high-load cruising block range is engineered for superior strength and performance and offers both plain and ball-bearing sheave assemblies. The range features high-grade glass fiber...

Size 6 64mm Plain Bearing Pulley Single Block Fixed EyeThe Size 6 Barton blocks are designed as our high-load cruiser block range and are of rugged construction. It features high-grade injection molded side plates, with all load-carrying components from...

Size 5 54mm Plain Bearing Pulley Block Single Block SwivelThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and...