Hardware

Furling Top SwivelThe top head swivel is from machine-turned solid aluminum with stainless steel ball-bearing.Features:Drum Diameter: 25mmSail Area: 100 square footBreak Load: 1,108kgSafe Working Load: 554kgWeight: 55g

Size 1 Deck Organizer - 4 SheaveDesigned for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard size up to...

Mast Base Organizer - 4 BlockThe Barton Mast Base Organiser is finished in our unique 'Spectro' grey anodizing for a long-lasting finish.It accepts up to four double tang blocks mounted on individual stainless steel swivel posts but with three deck...

Drain Plug - Black 15mm (19/32")This screw-type black drain bung is still among the best available. Supplied with rubber `O' ring for a watertight seal.Specifications:Length: 15mm (19/32")weight: 7gm(.23oz)

Transom PintleManufactured from stainless steel with tough nylon surrounds. A wide range of rudder fitting widths are available.Features:Pintle Diameter: 9.5mmFastenings Diameter: 5mmWeight: 70g

35mm Diameter Plain Bearing SheaveA replacement all-purpose rope sheave.  Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment.   The...

Stanchion Bullseye Stanchion Bullseye which fits the base of stanchions for smooth control of furling lines.  The contemporary sleek design features a Dyneema-effect securing strap over the metal retaining rod, through-bolted onto a fully...

Deck Organizer - Size 2 - 2 Sheave - Black Designed for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard...

Deck Organizer - Size 1 - 6 Sheave Designed for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard...

58mm Diameter Ball Bearing Rope Sheave A replacement all-purpose rope sheave. Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment. The...

64mm Diameter Ball Bearing Rope SheaveA replacement all-purpose rope sheave. Used throughout the complete Barton block range. Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment. The unique, super-low...

DO 550 Rope Clutch - Spring Assembly   Replacement spring assembly for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications:Color: SilverBox Dimensions: 1"H x 4"W x 6"L WT: 0.01 lbsUPC:...

DO 550 Rope Clutch - Base Plate Replacement base plate for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications:Color: SilverBox Dimensions: 1"H x 3"W x 7"L WT: 0.1 lbsUPC: 5035088815470Brochure (pdf)

DO 550 Rope Clutch - Cam Replacement cam for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications:Color: SilverBox Dimensions: 1"H x 2"W x 5"L WT: 0.1 lbsUPC: 5035088815463Brochure (pdf)

DO 550 Rope Clutch - Handle Replacement handle for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications:Color: BlackBox Dimensions: 2"H x 3"W x 6"L WT: 0.1 lbsUPC: 5035088815456Brochure (pdf)

Opening Luff Rope PrefeederFeatures:Single-handed operation by pushing on the springEasy to install with a lashing or fixed to the forestayCan be installed below any headsail foil or headsail reefing configurationStainless steel forged...

Double Stanchion Tube - 26"Double lifeline stanchion is 26" tall and accepts up to 5/16" (8mm) diameter coated wire. Works with Schaefer base 36-01. L 26" (660 mm), W 1" (25 mm), T 1/16" (1.5 mm), Weight 1 lb. 6 oz. (624 g)

Furler Pull Back Bracket/Haylard Restrainer - LargeHalyard Restrainer mounts directly on the front of the mast below the Genoa Halyard sheave. Restrainer "deflects" halyard eliminating Halyard Wrap.Halyard Restrainer appropriate for boats from 27' - 53'...

Stainless Steel Cleat - 8"8" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 5/8" (16mm), Length 8" (203mm), Height 2.0" (51mm), Fastener size 5/16" FH, Fastener center/center 2.0" (51mm), Weight 1...

Stainless Steel Cleat - 6"6" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 1/2" (12mm), Length 6" (152mm), Height 1.2" (30mm), Fastener size 1/4" FH, Fastener center/center 1.5" (38mm), Weight 9...