Hardware

High Load Eye 12mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep...

SkyLock 800The Barton SkyLock 800 features 316 stainless steel side plates, glass-reinforced nylon cover plates, and an internal self-locking aluminum cam to lift and lock loads securely using lines...

SkyLock 400The Barton SkyLock is an integral part of the SkyDock lifting system. The clever design and positioning of the locking cams mean the control line will never slip even when accidentally...

Pillar Fairlead for 70200 Cam CleatThis add-on enables the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind...

Pillar Fairlead for 70300 Cam CleatThis add-on enables the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind...

Kevlar Cam Cleat MidiManufactured from a composite Kevlar/Zytal material, this advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams...

"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve...

"Captain Hook" Chain Snubber Large Snubber Hook for 3/8" & 1/2" Chain with 15' of 5/8" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached...

"Captain Hook" Chain Snubber Small Snubber Hook Only (5/16" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve...

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached...

Backing Plate for 704-02-62Schaefer Stainless Steel Backing Plate for 704-02-62.

FRX25 Friction Ring - 25mm (63/64")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles...

FRX20 Friction Ring - 20mm (25/32")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles...

FRX15 Friction Ring - 15mm (19/32")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles...

FRX10 Friction Ring - 10mm (25/64")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles...

FRX6 Friction Ring - 7mm (9/32")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are...

165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on...

Stanchion CleatDesigned to fit stanchions or pushpit/pulpit tubes - fits in seconds and features soft nylon jaws that will not damage the tube.Technical Specifications:Material - NylonDimensions...

Shroud CleatBarton Marine's Shroud Plain Cleat is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.Features:Clamps...

Shroud Cleat with EyeBarton Marine's Shroud Plain Cleat with Eye is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage...