Accessories

ROKK 10W Waterproof Wireless Charger - Surface MountThe IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment without needing...

ROKK 10W Waterproof Wireless Charger - HiddenThe IPX6 waterproof 12/24V Qi-certified phone waterproof wireless charging range enables charging in the outdoor environment without needing phone...

RJ12 UTP Cable - 10MA cable to connect the BMV shunt to the BMV head unit. An RJ12 cable ships standard with a BMV battery monitor, but if this cable is too long or too short it can be replaced by...

Phoenix Inverter Control f/ VE.Direct InvertersThis panel is intended for all VE.DIRECT Phoenix Inverters.The panel connects to the inverter's remote on/off (H/L) port via two wires, not provided...

ROKK SC-USB-F1 Flip Pro Waterproof USB Socket - Dual PortFlip Pro is designed for use with either a 12V or 24V input and features 1x USB-A and 1x USB-C charging port. This provides the optimum...

SmartSolar MPPT 150/60-TRThe Victron SmartSolar MPPT 150/60 Solar Charge Controller is Bluetooth accessible via either built-in Bluetooth or the Victron Energy Bluetooth dongle. The VictronConnect...

Battery Switch 275A 12-48VDC Surface or Panel MountThe Battery Switch ON/OFF 275A is suitable for battery systems up to 48V. It has a unique ergonomic and aesthetic knob design. The knob is...

SolidSwitch 104 for DC Loads Up To 70V/4AFeatures:The SolidSwitch 104 will switch DC loads of up to 70V/4A and can be controlled by a low-power digital signal.The DC load can be resistive,...

GX Touch 50 Adapter for CCGX Cut-OutThis adapter is designed to easily replace the CCGX display with the newer GX Touch. Contents of the packaging are the metal bracket, the plastic bezel, and four...

GX Touch 70 Wall MountThe GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount...

GX Touch 50 Wall MountThe GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount...

GX Touch 70 Surface Mount Display - 7"The GX Touch 70 is a display accessory for our Cerbo GX. The seven-inch touch screen display gives an instant overview of your system and allows you to adjust...

GX Tank 140 Tank Monitoring for 4-20 MA, 1-10VDC Sensors - Monitors Up to 4 Sensors *Sensor Not IncludedThe GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for our...

V10-D104K 4 Gauge Add-A-Amp Kit for 1/0 Gauge WireIf you've already installed a 1/0 AWG amplifier wiring kit in your boat, the T-Spec V10-D108K 4 AWG wiring kit will let you add another amplifier to...

V10-2041 4 Gauge Amp Wiring Kit - 20' (6.1 M)A marine amplifier has to stand up to the rigors of life on the water, and so does the wiring kit you use with it.  The T-Spec V10-2041 Amp Kit is ideal...

MasterBus Cable - 6MSuitable for data traffic and powering peripheral equipment in harsh environments, this is the only cable you need for your MasterBus network. MasterBus compatible products come...

Marelube TEF45 30cc SyringeA highly water-resistant synthetic lubricant grease containing 45% PTFE, the highest PTFE available. Perfect for heavy loads and bi-metal anti-corrosion applications. Also...

Marelube TEF45 6cc SyringeA highly water-resistant synthetic lubricant grease containing 45% PTFE, the highest PTFE available. Perfect for heavy loads and bi-metal anti-corrosion applications. Also...

AC Universal Plug Holder - BlackFeatures:Black AC Universal Plug Holder is designed for all standard 120V AC plugsPlug clamp insert included—converts plug holder to an AC inlet for battery...

AC Universal Plug Holder - WhiteFeatures:White AC Universal Plug Holder is designed for all standard 120V AC plugsPlug clamp insert included - converts plug holder to an AC inlet for battery...