Accessories

Fluorescent Dye Marker - 2-PackPowder that turns snow or water into a bright fluorescent green signal.  You can write in the snow or on the ground.  Serves as an excellent signal for rescuers to mark your location.Features:Environmentally...

Signaling Kit - Flag, Mirror, Dye Marker & WhistleSelection of visual and audible signals that can be seen or heard by sea or air rescues.  Pack in a polybag.  Includes:1 USCG Approved Distress FlagApproved for daytime use only3' x 3' with...

Top-Mounted Flag Pole Socket Polished Brass - 3/4" IDFeatures:Polished Brass Top Mounted Flag Pole SocketTube I.D. - 3/4"Base - 2"Height - 1-3/4"Fastener - #6(3) Specifications:Type: Flags & Flag PolesBox Dimensions: 2"H x 4"W x 6"L WT: 0...

Gasket & Seal Set for Helm Pumps MT30-MT140Full service kit for VETUS Helm Pumps MT40 to MT140 (including the more recent MTP42, MTP53)Consists of shaft seal (HS801 25 x 42 x 7mm) and back plate gasket (HS804).

Strainer for Type FTR140This strainer is for the FTR140 waterstrainers.

Replacement O-Rings Set - 5-PackSet of 5 O replacement Ring seals for Vetus FTR330 Series Raw Water Strainers.

Set O-Ring & Cover for Waterfilter 330Features:Vetus part #FTR3301 is replacement strainer cover and o-ring for all Vetus FTR330 series raw water strainersSpecifications:Strainer size: 13 (33/64") to 38 mm (1-1/2")Note: Do not overtighten

O-Ring Set for Waterfilter 1320 - 5-PackThis set contains the O-ring (5x) for the FTR1320 Waterfilter

O-Ring & Cover for Waterfilter 1320Replacement lid (Cover) and O Ring kit for the VETUS FTR1320 series raw water strainer units.Fits all sizes from 38 to 51mm.

Adapter Plate to Replace BPS/BPJ Panels with BPSE/BPJE PanelsAdapter plate for use when replacing old BPS/BPJ panels with updated BPSE/BPJE type panels. The updated panels are 85mm x 85mm, whereas the old style panels measured 98mm x 98mm. Quick Guide...

Set of Shear Pins for Bow Thruster 45 & 50kgf - 5-PackSet of brass inboard shear pins (3 x 23.3mm) parallel, for the Vetus 45 and 50Kgf Bow Thrusters.

Replacement Portlight Lens Only - 5" x 12" - SmokeReplacement lens only for Beckson Opening PortsFeatures:5" x 12"Smoke

1-1/4" Flush Mount Flag Pole SocketMade from beautiful long lasting T316 polished stainless steelInsets nearly flush to the deck60° angle Specifications:Type: Flags & Flag PolesBox Dimensions: 3"H x 4"W x 6"L WT: 0.6 lbsUPC:...

1-1/4" SS Top Mount Flag Pole SocketMade from beautiful long lasting T316 polished stainless steel. Specifications:Type: Flags & Flag PolesBox Dimensions: 3"H x 4"W x 6"L WT: 0.6 lbsUPC: 040011285461

Teak Flag Pole 1-1/4" x 36"Boaters appreciate teak's traditional beauty because of its intricate grainpatterns and color variations. The high oil content of the wood keeps itfrom deteriorating or warping in the harsh marine environment of sun, wind,and...

1/2" D-Sponge Gasket 7'7' of D-Sponge gasket for hatch repairModel years 1990 to present

Snaps Fastener Installation Tool - 1-SetEasy to useComplete instructions includedDie and setting tool, packaged as a set

Life Ring/Ring Buoy Letter KitNow you can customize your life ring with our Taylor Made Lettering kit. Package includes 2" black letters and numbers (4 ea.) plus symbols. Constructed from waterproff marine grade 4 mil. vinyl, resistant to fuel,...

Charlevoix® Flag Clip For 7/8" - 1" PoleThe original Charlevoix Flag Clip ends the trouble of attaching your flag to a standard flag or stern light pole. This simple onepiece clip attaches semi-permanently to your pole and will keep your flag...

Charlevoix® Flag Clip - One-Piece Fits 3/4" PoleThe original Charlevoix Flag Clip ends the trouble of attaching your flag to a standard flag or stern light pole. This simple onepiece clip attaches semi-permanently to your pole and will keep your...