Boat Outfitting

Long Hose Trim - 3-1/2" with ScrewsHose trim is used for appearance and to conceal the hole that is drilled for the hydraulic hose to pass through the transom.Features:3-1/2 inchesResist ultraviolet rays and are made of impact-resistant nylon or...

Premier Wiper Arm - Stainless Steel - Single - 15-20"Combine the heavy-duty construction and materials of the Premier wiper arm line with a built-in wet-arm system that allows for a clean and easy installation of a washer system. A simple and easy way...

Fluid ReservoirThis reservoir is meant for holding hydraulic pump fluid.How to Use:Periodically, check the fluid level in HPUWith the trim tabs completely retracted, the fluid level should be about 2" from the bottom of the reservoir (approximately 22...

Hydraulic Hose Kit 3' - PairTwo high-pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.Specifications:Length: 3 ft.Fittings: ORFS*Not recommended for use with SilverSteer™ Series cylinders.

16oz Boat Cleaner - Removes Waterline & Rust StainsThis is an ethanedioic acid-based cleaner.Features:This cleaner removes yellow/brown waterline stains/scum and rust stainsShelf Life at 23 degrees Celsius is 24 monthsSpecifications:pH Value: 1...

32oz Stainless Steel CleanerThis is a phosphoric acid-based stainless steel cleaner. Features:It removes rust staining and surface corrosion from polished marine-grade stainless steel Shelf Life at 23 degrees Celsius is 24...

16oz Stainless Steel CleanerThis is a phosphoric acid-based stainless steel cleaner. Features:It removes rust staining and surface corrosion from polished marine-grade stainless steel Shelf Life at 23 degrees Celsius is 24...

Bracket Mounting Disks - Quantity 6An aluminum backing support for a trolling motor mount is a 2-in. diameter disk made of 1/2 in. thick 6061-grade aluminum. The backing support is designed to provide additional reinforcement to the mounting area of the...

Force® Kraken LiveScope™ Mounting BracketUse this bracket to mount your compatible LiveScope transducer to your Force Kraken trolling motor by running the cable through the shaft of the motor.

Quick Release Plate System - White This quick-release bracket allows you to easily install or uninstall your Force® Kraken trolling motor.

Quick Release Plate System - BlackThis quick-release bracket allows you to easily install or uninstall your Force® Kraken trolling motor.

Deck Mount Stabilizer KitUse this to stabilize your Force® Kraken Trolling motor when in the stowed position.

Ultrex Lift Assist Cylinder for 80LB Motors with 45” Shaft LengthThese replacement lift assist cylinders for Ultrex trolling motors work by increasing the effective weight of the overall lift assist system to account for the added weight of...

MKA-60 Stabilizer KitReduces bounce on bow-mount trolling motors. Equipped with a low profile mounting base that allows the stabilizer to be easily removed. The pivoting arm can be folded down when not in use.Features:Reduces motor bounce in the stowed...

MKA-64 Quick Release BracketEasily remove your electric steer and bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The...

MKA-62 Cable-Steer Quick Release BracketFor quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet, secure locking system. Fits 52" to 72" shaft foot-control motors and 62" shaft...

RTA-61 Cable-Steer Quick Release BracketFor quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet and secure locking system. Fits foot control motors with up to a 45" shaft and...

RTA-62 Quick Release BracketEasily remove your electric steer, bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The...

MKA-58 Boat Deck Reinforcement KitProvides additional strength, stability, and versatility for mounting Minn Kota Quest series RT Instinct, Ulterra, Terrova, and RT Terrova trolling motors.Features:Provides additional strength and stability for mounting...

MKA-57 Quick Release BracketThe bracket and top plate allow you to easily slide the motor inboard (10") or easily remove it for storage and security. Features anodized aluminum construction with stainless steel components and hardware for optimal...