Busbars, Connectors & Insulators

VFDB4 MANL 4 Position Distribution Block with CoverThis compact distribution block from T-Spec will handle the high-current power distribution for your single source to four (4) smaller gauge power wires, ensuring that your wiring's connected securely,...

VFDB2 MANL 2 Position Distribution Block with CoverThis compact distribution block from T-Spec will handle the high-current power distribution for your single source to two (2) smaller gauge power wires, ensuring that your wiring's connected securely,...

8 Position Battery Terminal - POS/NEGThe VBTPN is an eight-position battery terminal that can accept up to (4) 4/8/10 AWG set screw outputs and (4) 1/0 to 10  AWG ring terminal outputs.  It includes (1) positive and (1) negative bolt-on posts...

4 Position Battery Terminal - POS/NEGThe V-BATT-TML is a four-position battery terminal that can accept up to (2) 1/0 AWG and (2) 4 AWG, down to (4) 10 AWG wires.  It includes all markers and hardware to be used for the positive or negative post...

Pro Installer Link Bar 35.5 - 42.5mm *5-PackPro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection...

Pro Installer Link Joiner 2-WayThis tin-plated bus bar can be used to link 2 adjacent DC products together.  The rating is 650 Amps, and it can be doubled up if required.  Made from tin-plated high-purity copper, this bar is intended for use...

Pro Installer Link Joiner 3-WayPro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro...

Busbar to Connect 6 Modular HoldersFeatures:Six position high current bus bar (1500 A)With two M10 input connections.Input current up to 2000 A.Recommended to parallel multiple high power Multi or Quattro inverter/chargersWarranty InfoWARNING: This...

2356 Water Resistant BusBar - 100 Amp with CoverProvides secure water-resistant bussing for harsh environments. The single side nesting design allows for wire entry from one side to maximize space.Features:Water-resistant design with standard ring or...

2307 Common 150A BusBar - (4) 1/4"-20 Studs w/CoverFeatures:The industry standard busbar for positive distributionThe industry standard busbar for the collection of negative or AC ground circuitsSpecifications:Maximum Voltage: 300V AC / 48V DCNumber of...

PowerBar Dual BusBar - Two 3/8"-16 StudsProvides compact high-ampere busing with 3/8" terminal studsSpecifications:Maximum Amperage: 200AMaximum Voltage: 48V DCNumber of Terminal Studs: 2Terminal Type: 3/8"-16 StudBus Material: Tin-Plated Copper CDA...

Dual Distribution Stud Module - 2 x 3/8"The 702-2S was designed specifically for transom areas for connecting battery cables from outboards. It also has many other applications where heavy duty positive and negative connections need to be terminated...

Pro Installer Insulated Stud - Single - 10mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts...

ATC Six Way Bus Bar with 5mm Input StudThe ATC Negative Bus uses the BEP Contour lock system to allow it to be joined to the ATC fuse holder. This keeps wiring tidy and conveniently located. Current Rating: 100Amps.WARNING: This product can expose you...

BEP Pro Installer Terminal Block - 6 Way - 30AThis terminal block is ideal for isolated connections up to 30A and suitable for connecting tails from AC and DC panels.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate...

Insulated Distribution Stud, Dual 1/4" - (Black)Dual StudMade with high temperature plastic basesStud covers push securely over the threaded stud covering to ABYC standardsDual studs ideal for +ve / -ve connections, branch circuits, windlass or inverter...

Insulated Distribution Stud, Single 1/4"Insulated Distribution Stud, Single 1/4" -Made with high temperature plastic basesStud covers push securely over the threaded stud covering to ABYC standardsDual studs ideal for +ve / -ve connections, branch...

Insulated Distribution Stud, Single 1/4"Insulated Distribution Stud, Single 1/4" -Made with high temperature plastic basesStud covers push securely over the threaded stud covering to ABYC standardsDual studs ideal for +ve / -ve connections, branch...

Single 10mm Insulated Stud with Power Tap PlateThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side...

10mm Double Instulated StudThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for...