Electrical

Push Button Switch - 24V Latching On/Off - Red LEDPush-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings...

Contour Switch Panel - Waterproof 6 WayCSP6 includes 6 switches unfused for installation where a separate fused supply is available.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State...

Waterproof Panel - 6 Switches - GreyFeatures: Compact panel size Sprayproof inline fuse holders with fuses included Waterproof power receptacles (16A) in five and three way models Waterproof to IP56 Switches rated at 20A DC LxWxH is 3.75'x4.25'x2.9'...

FS Box Black f/15A, 20A, 30A ReceptaclesThis black non-metallic box with two 3/4" K.O. holes accepts 15A, 20A and 30A receptacles, and 7420CR weatherproof covers.Features: Accepts 15A, 20A and 30A receptacles Two 3/4 inch knockout holes Black...

m-LVD Low Voltage DisconnectSenses low battery voltage and automatically disconnects devices to save power for starting or to preserve battery lifeA dead battery is one of the most common reasons for a tow. Don't get stranded with a dead battery. The...

Telephone to Network Cable AdapterThe Freedom SW Remote Adapters (TEL to Xanbus cable) allow Xanbus-enabled devices to establish a Xanbus network using a 4 pin RJ11(a regular telephone cable) or a 6 pin RJ12 cable (a Xantrex remote cable) that comes...

Freedom SW2524 230V Sine Wave Inverter/Charger - 2500WThe Freedom SW 230V Inverter/Charger is a true sine wave inverter/charger that can be used for mobile, marine and commercial applications. The Freedom SW 230V Inverter/Chargers are designed to...

Battery Temperature Sensor (BTS) f/Freedom SW SeriesThe Battery Temperature Sensor (BTS) mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger or charge...

Battery Temperature Sensor (BTS) for Freedom 458 SeriesThe Battery Temperature Sensor (BTS) is a replacement BTS designed for the Freedom 458 inverter/charger series. The sensor has a 15 foot cable attached and it mounts on a terminal post of a battery...

30 Amp Power Cord Plus Cordset - 35' - YellowAll Marinco cordsets are made of the highest quality marine-grade construction with features you won't find on other power cords.Features:Watertight molded plug and connector for safety and...

DS-H6-BLK Horizontal Cable Seal - GreyThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antenna and navigation light cables.  A tapered gland...

DS6-P Vertical Cable SealScanstrut premium IP68 waterproof cable seal provides easy-fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables...

Medium Duty Battery Selector Switch - 250A ContinuousFeatures:For use with 6 to 32 Volt Marine Electrical SystemsCapacity - 250 AMPS Continuous, 360 AMPS IntermittentWhen used with Non-Unitized Alternators, these models will interrupt the field current...

Black 4/0 AWG Battery Cable - Sold by the FootFeatures:Ancor Marine Grade™ wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysisUltra flexible (Type 3) stranding resists fatigue due to...

12-10 Gauge - #10 Heat Shrink Spade Terminals - 100-PackAncor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and...

16-14 Gauge - #10 Heat Shrink Spade Terminals - 100-PackAncor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and...

22-18 Gauge - #8 Heat Shrink Spade Terminals - 100-PackAncor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and...

22-18 Gauge - #8 Heat Shrink Spade Terminals - 25-PackAncor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and strain...

22-18 Gauge - #8 Heat Shrink Ring Terminal - 25-PackGauge Size: 22-18Screw Size: #8 Quantity: 25Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides...

22-18 Gauge - #8 Heat Shrink Ring Terminal - 3-PackGauge Size: 22-18Screw Size: #8 Quantity: 3Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Heat activated adhesive lining provides...