Marine Hardware

Door Catches - White Nylon/Stainless - PairSpecs: White Polymer Stainless Steel Mounting & Keeper Screws Catch Screw Size: 3/4 x #8 Catch Dimensions: 1-1/4" x 5/8" Mounting Screw Size: 4 R.H.

Clam Shell Ventilator - Chrome Plated Brass - 4" x 3-3/4"Specs: Chrome Plated Brass Dimensions Base: 4" x 3-3/4" Width Opening: 2-1/2" Height Opening: 1-5/8" Screw Size: #6

Chrome Plated Brass 3/8" Inset HingesFeatures: Semi-Concealed For Inset Doors Chrome Plated Stamped Brass 3/8 Inch Inset Specifications:Material: BrassColor: BrassBox Dimensions: 1"H x 3"W x 7"L WT: 0.2 lbsUPC: 085226023651

Spare Cap f/1313 Gas FillNon-Locking Spare Cap f/1313 Gas Fill

Quick Release Fender LockStainless SteelHigh PolishFor dockside safety and convenience, Taco Marine's fender-clip ensures secure, quickly stored fender lines. The Fender clips ensure that lines remain at the optimum length with the mounting pin attached...

Super Quick Fist ClampSuper Quick Fist is ideal for holding fire extinguishers, oxygen cylinders, CO2 tanks, and other equipment. Mounts easily with three #10 (5 mm) bolts or screws (not included). Can be mounted with strap facing any direction...

Quick Fist ClampsSecuring your equipment just got a whole lot easier! Quick Fist, a one piece rubber clamp, is ideal for stowing or transporting tools.Quick Fist is a rubber clamp that mounts easily to keep tools and equipment firmly in place. Ideal for...

0540 Gas Fill/Vent for 1-1/2" Hose - Angled NeckFeatures:Angled NeckChrome Plated Bronze CapBlack Polymer BodyStainless Steel Bead ChainIntegral Tank Vent with Flame Arrestor and Anti Surge ValveDeck Plate Key Included Quick Guide (pdf)

0540 Spare CapPerko's 0540 spare gas cap with chain

Flush Lifting HandleChrome Plated Zinc AlloyDimensions: 3" x 2-1/4" Quick Guide (pdf)

Flush PullChrome Plated Zinc AlloyBlack Polymer Finishing FlangeSpring Loaded, Can be mounted Horizontally or Vertically

Gas Tank VentChrome Plated Zinc Alloy with Black Polymer Splash GuardRemovable 30 Mesh Stainless Steel Wire Screen Flame Arrestor - for use with fuel applicationsHose Size: 5/8"Max Hull Thickness: 3/4"

Flush PullChrome Plated Zinc AlloyDimmensions: 3-11/16" x 1-11/16"

Fender LockChrome Plated Zinc AlloyThe eye is to be permanently attached to the fender line

Side Mount Rowlock SocketsPlain or Chrome Plated Zinc AlloyBlack Polymer BearingsFor Use with Fig. 1227, 1262 or 1267 Rowlock HornsScrew Size #10

Edge Mount Rowlock SocketPlain Plated Zinc AlloyBlack Polymer BearingsFor Use with Fig. 1227, 1262 or 1267 Rowlock HornsScrew Size #10

Barrel BoltChrome Plated Bronze Body and Keeper3/8" Diameter BoltBulkhead Keeper Easily Installs in a 5/8" HoleIncludes Friction Pad to Eliminate Rattle and Provide Smooth Operation

PSS Shaft Seal 2-1/2" Shaft 4" TubeShaft Diameter: 2-1/2"Stern Tube Diameter (D): 4"Total Length (A): 9.625"Total Length (compressed) (Compressed A): 8.375"Rotor Diameter (B): 4.2"Carbon Cuff Diameter (C): 3.75"Stern Cuff Length (E): 2"The PSS Shaft...

PSS Shaft Seal 2" Shaft 3-1/4" TubeShaft Diameter: 2"Stern Tube Diameter (D): 3-1/4" to 3-3/8"Total Length (A): 9.175"Total Length (compressed) (Compressed A): 8.175"Rotor Diameter (B): 3.75"Carbon Cuff Diameter (C): 3.25"Stern Cuff Length (E): 2"The...

PSS Shaft Seal 1-1/2" Shaft 2-1/2" TubeShaft Diameter: 1-1/2"Stern Tube Diameter (D): 2-1/2" to 2-5/8"Total Length (A): 9.175"Total Length (compressed) (Compressed A): 8.175"Rotor Diameter (B): 3.75"Carbon Cuff Diameter (C): 3.25"Stern Cuff Length (E):...