Rollers & Brackets

Shackle Tandem Hanger Galvanized Frame Hanger - 2"C.E. Smith heavy-duty equalizer hanger is galvanized and designed to work on 2" wide frame rails.

Bow Stop 8.25" Strap Galvanized Mounting BracketC.E. Smith heavy-duty galvanized strap mounting bracket bolts to the cross member on trailers to support the bow stop.

Hanger Torsion Mounting Hanger - 14" GalvanizedThe torsion axle mounting hanger attaches to 2" wide beams with u-bolts and holds torsion axles on single and tandem trailers with 14" tires and wheels. U-bolt mounting holes are 33-3/4" on center.

Bunk Galvanized Mounting BracketC.E. Smith 11-gauge zinc-plated steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set the proper angle. Bracket measures 3" wide.

Plate Bent Bunk Galvanized Mounting BracketC.E. Smith heavy-duty zinc-plated steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set the proper angle. Bracket is 3/16" thick x 3" wide.

Strap Bunk Galvanized Mounting Bracket - 16" x 3" x 9"C.E. Smith's heavy-duty galvanized strap bunk mounting bracket bolts to the cross member on a personal watercraft trailer. Specifications:Measures 3/16" x 3" x 9"Strap tie plate required for...

Strap Bent Channel Upright Short Galvanized Bracket - 9"Specifications:9"UprightShortGalvinizedBent Channel

Bunk Mounting Bracket - GalvanizedThe heavy-duty galvanized hat-style bunk mount bracket attaches the bunk to upright bunk brackets on 3x3 cross members on trailers not exceeding 4,700 lbs capacity.Used primarily for the front bunk support, and on a few...

Trailer Bunk Padding 12" x 12'12 ft. long roll of durable, weather-resistant polypropylene marine carpet material. Easy to cut and custom fit. Features:12 inches wideProtects hull Eases loading and launching Charcoal colorAcrylic backing...

8"-5/8" Keel Roller Black Natural RubberBlack natural rubber rollers are original equipment on many trailers. Fits standard brackets and shaft sizes.Features:Black natural rubber3-3/8" Diameter7-7/8" wide5/8" shaft

Roller Shaft 5/8" x 13" with Cap NutsReplacement Roller shaft and cap nuts.Features:5/8" diameter x 13" longZinc PlatedComes with two 5/8" cap nuts

Zinc U-Bolt 7/16"-14 X 3-1/8" X 3" with Washers & Nuts - SquareZinc-plated u-bolt for mounting brackets & accessories to trailer frames.Features:Square bendGrade 57/16"-14 diameter/thread3-1/8" W x 3" L*Comes packaged with nuts and washers.

Zinc U-Bolt 7/16"-14 X 3-1/8" X 4" with Washers & Nuts - SquareZinc-plated u-bolt for mounting brackets & accessories to trailer frames.Features:Square bendGrade 57/16"-14 diameter/thread3-1/8" W x 4" L*Comes packaged with nuts and washers.

Swivel Bracket Assembly - 8" BracketThis Smith adjustable bracket is designed to support bunk boards. Hot dip galvanizing for years of use in the harsh marine environment.This bracket assembly uses bolster bracket-10100G and swivel bracket-10200G...

Swivel Bracket KitGalvanized swivel top brackets provide vertical and tilting adjustments for trailer bunks.Swivel Brackets for mounting Bunk Boards to Bolster Brackets.Features:Bunk flange holes 3/8" dia.Bunk flange 1-3/8" x 3-1/2"Swivel flange hole...

Grip Guard Traction GripFeatures:Guard Against Slips & FallsSilicon Carbide Grit SystemAnti-Slip Safety TapeAcrylic Waterproof Pressure Sensitive AdhesiveHeavy-Duty GradeEasily Trimmable(2) 15" x 5" Grip Strips Brochure (pdf)

Grip Guard Comfort GripFeatures:Guard Against Slips & FallsFoot-Friendly PEVA Grip SystemAnti-Slip Safety TapeAcrylic Waterproof Pressure Sensitive AdhesiveHeavy-Duty GradeEasily Trimmable(2) 15" x 5" Grip Strips Brochure (pdf)

Side Angle "L" Bracket - Pair - Galvanized7 ga, 1/2” shaft hole, 3/8” mounting hole. Sold in pairs.

Wobble Roller 4-3/4"ID with Bushing Steel Plate BlackFeatures:Diameter: 4-3/8"Width: 4-3/8"Shaft: 3/4"

Wobble Roller Retainer Ring - Zinc PlatedUsed by many trailer manufacturers to secure wobble rollers onto their individual shafts. Zinc plated. Two retainer rings and two 1-1/8" washers per blister package.