Seating

Spring-Lock™ Non-Locking Post - 15.5"Hefty 1-3/4″ diameter stainless steel posts. Use with non-locking Spring-Lock™ seat mount ot any non-locking Spring-Lock™ base (sold separately).

Non-Locking Spring-Lock™ Seat MountE-coat rust-resistant finished stamped steel. Adds 1-1/2″ to the height of the post. Use with any Spring-Lock™ or Clip-Lock non-locking post (sold separately).

KingPin™ Standard Square Steel Base - 7"x7" - Kennedy BaseStandard square mild steel base with black krinkle finish. 3″ below deck needed. Requires a 2-1/2″ hole in deck.

KingPin™ Standard Fixed-Height Offset Post - 13"Hefty 1-3/4″ diameter stainless steel post with mild steel e-coat pin. Provides a full 5″ of offset extension. Use with any KingPin™ seat mount or any standard KingPin™ base...

Trac-Lock™ Hi-Lo Fixed-Height Post - 13"2-3/8″ Anodized aluminum post. Use with seat mount (#1600205, sold separately). Use with any Taper-Lock™ base (sold separately).

5-Legged Deck Base with Plate33″ Diameter 5-legged deck base with pre-drilled 5/16″-18 tap mounting plate to accept any Springfield® Marine 12″ or 9″ round pedestal base. Approximately 4″ high with floor pods or...

4" Offshore Fixed-Height Helm Pedestal PackagePackage includes heavy-duty 4″ Workhorse slide & swivel with anodized finish, fixed-height brite dip 4″ pedestal with 12″ round polished base. The Helmsman flip-up footrest flips up out...

4" In-Shore RS2 Pedestal PackagePackage includes locking Workhorse swivel mount with anodized finish, high-strength polished aluminum fixed-height 4″ pedestal with 12″ round base, 316 electro-polished stainless steel 28″ round...

4" Elite Fixed-Height Pedestal - 30"4″ Pedestal of .213″ thick aluminum with 12″ round base, polished finish. The pedestal is sized and pressed into base then rim welded for stability. Use with any 4″ Mariner II or Workhorse...

2-3/8" Clipper Adjustable PackagePackage includes 2-3/8″ adjustable pedestal with 10″ round base and non-locking Trac-Lock™ swivel. Pedestal adjusts in 1-inch increments.

2-3/8" Clipper Fixed-Height Pedestal - 13"2-3/8″ Pedestal with 10″ round base and 9″ mounting pattern. Use with locking Trac-Lock™ slide or swivel (sold separately).

2-3/8" Plug-In™ Stainless Steel Square Base - 7"x7"Made of stainless steel. Suitable for above or under carpet applications. Below deck mount requires a 3-3/4″ hole in the deck. Use with any 2-3/8″ Plug-In™ post (sold separately)...

2-3/8" Locking Fixed-Height Post - 13"Anodized to withstand all conditions. Heights are from the top of the post to the deck when the post is installed. Fits into any 2-3/8″ Plug-In™ base (sold separately). Use with any 2-3/8″...

2-3/8" Plug-In™ Locking 3-Piece Pedestal Package - 12"Locking 3-piece package includes locking Trac-Lock™ swivel seat mount, Plug-In™ Hi-Lo fixed height post with anodized finish, and Plug-In™ 9″ diameter base with satin...

In-Shore LE1 Adjustable Mainstay PackageHeavy-duty adjustable mainstay package includes locking Trac-Lock™ air-ride slide & swivel, 316 electro-polished stainless steel half-round footrest, and black powder-coated 5-legged deck base. Pedestal...

2-3/8" Explorer Fixed-Height Locking Pedestal - 10"Anodized aluminum 2-3/8″ pedestal with 9″ round satin anodized base. Use with Trac-Lock™ slide or swivel (sold separately).

2-3/8" Explorer Fixed-Height Locking Pedestal - 9"Anodized aluminum 2-3/8″ pedestal with 9″ round satin anodized base. Use with Trac-Lock™ slide or swivel (sold separately).

2-3/8" Adjustable Locking Short Mainstay PackagePackage includes 2-3/8″ high-strength anodized aluminum air-powered height adjustment pedestal (500 newton cylinder) with 9″ round anodized base, and locking Trac-Lock™ swivel & slide...

2-3/8" Adjustable Mainstay Package with Locking Swivel & SlidePackage includes 2-3/8″ high-strength anodized aluminum air-powered height adjustment pedestal (500 newton cylinder) with 9″ round anodized base, and locking Trac-Lock™...

2-3/8" Adjustable Mainstay Package with Locking SwivelPackage includes 2-3/8″ high-strength anodized aluminum air-powered height adjustment pedestal (500 newton cylinder) with 9″ round anodized base, and locking Trac-Lock™ swivel...