Transducer Accessories

HDI Trolling Motor XDCR Adapter CupFor using HDI 83/200 and 455/800 kHz XDCR on a trolling motor Specifications:Type: AdaptersBox Dimensions: 3"H x 7"W x 8"L WT: 0.37 lbsUPC: 9420024121924

Kayak Scupper Transducer MountLowrance's transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance...

Attaches transducer to a trolling motor.Works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI Specifications:Type: Mounting BracketsBox Dimensions: 4"H x 4"W x 9"L WT: 0.25 lbsUPC: 042194535944

Extension Cable For LSS-1 or LSS-2 TransducerFor use specifically with Lowrance's LSS-1 or LSS-2 Transducer. If the 20' transducer cable is not long enough, the 10' extension cable is available...

Transducer Mounting PlateFeatures:Marine-grade polymer plate will not warp or corrodePremium materials; unaffected by UV raysMounts easily with only 2 screwsAll hardware included...

MM-HB Mix & Match™ Cable 5-Pin 600W Series with Humminbird #9 Connector - 9MSpecifications:Sensor Connector: MMDisplay Connector: HBMix and Match Series: 5-Pin 600 WattCountry of...

Hydrodynamic Fairing Block for CB101 Series TransducersEchonautics fairing blocks are made for the thru-hull installation of traditional stem transducers. A fairing block is recommended for the...

Hydrodynamic Fairing Block for CB131 Series TransducersEchonautics fairing blocks are made for the thru-hull installation of traditional stem transducers. A fairing block is recommended for the...

FCV800 Y-Cable f/Multi-Channel CHIRP Transducer Specifications:12-Pin to 2 10-PinSpecifically for FCV800For dual channel CHIRP transducerY-cableThis product may not be returned to the original point...

Forward-Facing Motorized Sonar MountThe FORESIGHT Forward-Facing Sonar Mount is the most sophisticated mounting system on the market. It allows the sonar transducer to stow and deploy with the...

1M Adapter Cable with Male 9-Pin Navico Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Navico units. Specifications:Type: AdaptersBox Dimensions: 1"H x 6"W x...

1M Adapter Cable with Female 8-Pin Garmin Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Garmin units. Specifications:Type: AdaptersBox Dimensions: 1"H x 6"W x...

1M Adapter Cable with Male 8-Pin Black Box Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with SI-TEX NavPro units. Specifications:Type: AdaptersBox Dimensions: 1"H...

12-Pin XDR Extension Cable - 10MFeatures:Extension Cable For Furuno Transducer10M (33' Length)12-PinColor: BlackThis product may not be returned to the original point of purchase. Please contact...

Mix & Match Cable for Raymarine 600W Non-CHIRP Transducers - 9mMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer...

Perspective Mount for LVS62 TransducerThe perspective mode mount takes your LiveScope™ XR real-time scanning sonar to the next level. Attach your LVS62 transducer to this mount to add an overhead...

Perspective Mount f/Livescope Plus LVS34The Perspective Mode Mount takes your LiveScope™ Plus real-time scanning sonar to the next level. Attach your LVS34 transducer to this mount to add an...

Trolling Motor Barrel Mount f/Livescope Plus LVS34 Mount a compatible LiveScope™ transducer on the barrel of your trolling motor with this kit. It is easily adjustable as it features molded teeth...

8 Degree Pole Mount f/Livescope Plus LVS34Position your LiveScope™ Plus LVS34 transducer on this 8-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too)...

0 Degree Pole Mount f/Livescope Plus LVS34Position your LiveScope™ Plus LVS34 transducer on this 0-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too)...