Veratron

EasyLink Connecting Cable for AcquaLink® & OceanLink® GaugesEasyLink connecting cable.This product may not be returned to the original point of purchase. Please contact the manufacturer...

Engine Oil Temperature Sensor - 1/2"-14NPT Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated...

Engine Oil Temperature Sensor - 3/8"-18NPT Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated...

Engine Oil Temperature Sensor - M14x1.5 Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated...

Engine Oil Temperature Sensor - M16x1.5 Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated...

Engine Oil Temperature Sensor - Single Pole, Common Ground - 50-150°C/120-300°F - 6/24V - M14 x 1.5 ThreadFeatures:Single Pole, Common Ground50-150°C/120-300°F6/24VM14 x 1.5...

EngineBox - Double EngineThe EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox...

EngineBox - Single EngineThe EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox...

Flange Adapter KitSmall but necessary instrument that will save your money and time.   Flange Adapter Kit for Tubular Level Sensors from 80 to 54mm.Flange Adapter Kit can be adapted to any...

Flush Mount Fixing Bracket - ViewLine GaugesFor flush assembly.  Put the instrument into the drill hole from the back. Adjust the instrument so that the gauge is level and fasten it to the stud...

Fresh Water Level Sensor (Resistive) with Adjust Lever & Seal Kit #750 - 12/24V - 200-600mm LengthFresh Water Level Sensor (resistive) with adjustable lever, sealing kit N05-008-750. This...

Fresh Water Level Sensor with Sealing Kit #370 - 12-24V - 4-20mA - 80-600mm LengthFresh Water Level Sensor (capacitive) with adjustable dip, sealing kit. This product may not be returned to the...

GO GPS ReceiverAll your boat’s data close to your finger tips. Veratron GO is NMEA 2000® certified and features an integrated GPS/GLONASS/GALILEO receiver. Compact and easy to install, it...

Fuel Level Sensor Single Station with Seal Kit #432 - 12/24V - 3-180 OHM - 150-160mm LengthFuel Level Sensor (resistive) with adjustable lever, sealing kit N05-801-432.This product may not be...

LinkUp - Intelligent Battery Sensor (IBS) Kit - 12VBatteries are essential for engine starting and operating onboard utilities.  With Veratron’s new Intelligent Battery Sensor (IBS),...

LinkUp - Pyrometer KitThe system includes a Veratron LinkUp Gateway Module that enables the Pyrometer Sensor to be connected to and compatible with the NMEA 2000 network.  Its internal galvanic...

LinkUp Analog to NMEA 2000 GatewayThe resistive-type LinkUp gateway provides an easy method to convert vessel and engine information to NMEA 2000.Easily installed, the LinkUp Gateway replaces the...

LinkUp Intelligent Battery Sensor Gateway - 12V - 500AHEasily installed LinkUp gateway modules replace the original wiring, delivering power to the LinkUp device and sensor from the NMEA 2000...

LinkUp Intelligent Temperature & PressureThis Sensor measures simultaneously the engine oil's temperature and pressure while providing the data to the LinkUp, which translates it to the NMEA...

LinkUp J1939 to NMEA 2000 GatewayThis single-sensor gateway is designed to upgrade your vessel sensors to NMEA 2000®. Can be easily configured through either the embedded wireless interface or...