Marine Navigation & Instruments

LAN Cable Assembly - 5M RJ45 x RJ45 4PFuruno's LAN Cable Assembly is designed to connect your NavNet 3D/TZT to your PC. This 5 meter cable comes with RJ45-RJ45 connectors.Features:LAN CableDesigned for NavNet 3D/TZT to PCLength: 5MConnectors: RJ45 -...

Bare Wire Transducer to 12-Pin Sounder Wire Block AdapterConnect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter.Compatible Devices:GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv & 7616xsvGSD™ 25...

Adjustable In-Hull Transducer This in-hull transducer has a patented adjustable feature which ensures that sound waves are transmitted vertically to the bottom on almost any hull with a deadrise up to 22°.  With no hull penetration,...

Transom Mount Transducer - 235kHzWith a low profile this depth unit offers little drag and easy installation for dead rise angles up to 30°. Recommended for boats up to 22' (7M) and speeds up to 55 knotsDesigned with a release bracket to...

Thru-Hull Transducer - 235kHz, 1-5/8" Diameter & 26' CableProvides minimal drag in the water. 235kHz transducer and 1-5/8" diameter with 26 feet of cable.This product may not be returned to the original point of purchase. Please contact the...

Raynet to RJ45 Female Adapter 100mmThis adapter has a RayNet Female connector at one end, and a RJ45 Female Gland connector at the other end. The Gland makes the RJ45 Female socket watertight. A typical use for this cable would be to convert a RJ45...

4m Extension Cable f/CPT-DV & DVS Transducer & Dragonfly 4, 5 & Wi-FishUse Raymarine's 4m cable to extend the length of the standard cable provided with Dragonfly CPT-DV and DVS transducers. Specifications:Type: ExtensionBox Dimensions: 1"H x...

B265LH Bronze Thru-Hull Mount Transducer w/Depth & Temp - 12-PinGarmin's best performing 1 kW thru-hull transducer, this mount performs well in deep water and has exceptional bottom and water column detail.This transducer has a depth of 3,000 feet; an...

TM265LH Plastic Transom Mount Transducer w/Depth & Temp - 12-PinGarmin's plastic transom mount performs well in deep water and provides exceptional bottom and water column detail.The best performing 1 kW transom mount, this transducer has a maximum...

AS ECX 30E Ethernet Cable Extender - 8-Pin - 30'The Ethernet Extension Cable is a 30' cable that allows you to extend the length of your ethernet cables.WARNING: This product can expose you to chemicals including LEAD which is known to the State of...

RayNet Cable Pullers - 5 PackRaymarine's Cable Pullers securely attach to the twist-lock plug on RayNet networking cables and provide a convenient, center-mounted attachment point for your pull string. The cable puller protects the connector's internal...

Masthead Cable & BaseRaymarine's 30M Masthead Cable and Base for Raymarine ST60 and i70.

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...